S-CSA+ HEX 14x100/35 SW21 ZP Concrete Sc
ARTICLENUMBER9640071811
ETA-approved heavy-duty concrete screws for high loads
- Self-tapping, screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- Type WOF = without combined washer
- Seismic performance category C2 with hef,2.
- ZP for dry indoor use.
Product overview
Packaging
Carton: 10 / Pack: 50 / Pallet: 2800Weight
150 gEAN
6416031718113Material
steelSurface
zinc-platedSuitable Conditions
Dry indoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
100 mmDrill hole diameter (d0)
14 mmFixture thickness (tfix,1)
35 mmOuter drive
AF21Hole in fixture (df)
18 mmNominal setting depth (hnom,1)
65 mmEffective setting depth (hef,1)
49.3 mmDrill hole depth (h1,1)
75 mmHead diameter (dk)
28 mmInstallation torque max (Nm) (Tinst)
100Minimum base material thickness (hmin,1)
120 mmElectrical number (FI)
1310898HEPAC number (FI)
3255570Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 65 mm | 4,0 kN | ||
| Cracked concrete, C20/25 | VRec | 65 mm | 18,7 kN | ||
| Non cracked concrete, C20/25 | NRec | 65 mm | 7,1 kN | ||
| Non cracked concrete, C20/25 | VRec | 65 mm | 26,8 kN |